SX4 4WD L4-2.0L (2008)
Quarter Window Glass: Service and Repair
REAR QUARTER WINDOW REMOVAL AND INSTALLATION
Reference: Rear Quarter Window Components
Refer to Windshield Removal and Installation as preparation, removal and installation procedures are basically the same. However, note the following.
^
Observe the following precautions when applying adhesive (1) along glass (2) edge.
^
Adhesive (1) should be applied evenly especially in height.
^
Be careful not to damage primer (3).
^
Press glass against body quickly after adhesive (1) is applied.
Adhesive amount specifications and position for rear quarter window
^
Width "a": Approx. 6 mm (0.24 in.)
^
Height "b": Approx. 13 mm (0.51 in.)
^
Position "c": Approx. 12 mm (0.47 in.)
^
Width "d": Approx. 14 mm (0.55 in.)
^
Position "e": Approx. 84 mm (3.31 in.)
