SX4 4WD L4-2.0L (2008)
Windshield Washer Switch: Service and Repair
Windshield Wiper and Washer Switch Removal and Installation
WINDSHIELD WIPER AND WASHER SWITCH REMOVAL AND INSTALLATION
Removal
1. Disconnect negative (-) cable at battery.
2. Remove steering column hole cover (1).
3. Remove steering column covers (2).
Turn steering wheel to access steering column cover rear end screws (3).
4. (Immobilizer model)
Remove immobilizer control module referring to ICM Removal and Installation.
5. Remove windshield wiper and washer switch (if equipped) (1) from combination switch assembly (2) and disconnect its coupler (3).