SX4 4WD L4-2.0L (2008)
2. Connect coupler to windshield wiper motor.
3. Install cowl top garnish referring to Cowl Top and Front Lower Crossmember Components.
4. Install windshield wiper arms with wiper blades (1) to specified position as shown in figure, and then tighten windshield wiper nuts to specified
torque.
Tightening torque
Windshield wiper arm nut a: 18 Nm (1.8 kgf-m, 13.0 ft. lbs.)
5. Install wiper pivot caps (2) to windshield wiper arm nuts.
