Verona L6-2.5L (2005)
Front Bumper Cover / Fascia: Procedures
Front Bumper Fascia Removal and Installation
Front Bumper Fascia Removal
1. Disconnect the negative battery cable.
2. Remove the front wheel well splash shields. Refer to Front Wheel Well Splash Shield Removal.
3. Remove the turn signal lamps, the front sidemarker lamps, the fog lamps, and the headlamps. Refer to Parking and Front Turn Signal Lamps
Removal, Sidemarker Lamps Removal, Fog Lamps Removal and Headlamps Removal.
4. Remove the fender-to-fascia bolts and the screws.
5. Remove the lower fascia screws and the bolts.
6. Remove the upper fascia screws.