Verona L6-2.5L (2005)
9. Remove the fascia.
Rear Bumper Fascia Installation
1. Install the fascia.
2. Install the upper fascia screws.
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
3. Install the luggage compartment fascia bolts.
Tighten:
Tighten the luggage compartment fascia bolts to 2 N.m (18 lb.in).
4. Install the rear combination lamps. Refer to Rear Combination Lamps Installation.
5. Install the luggage compartment wheelhouse trim panel. Refer to Luggage Compartment Wheelhouse Trim Panel Installation.
