Verona L6-2.5L (2005)
Front Door Exterior Handle: Service and Repair
Outside Door Handle Removal and Installation
Outside Door Handle Removal
1. Remove the door seal trim. Refer to Door Seal Trim Removal.
2. Disconnect the outside door handle and the lock rods.
3. Remove the bolts and the door handle.
Outside Door Handle Installation
1. Connect the outside door handle and the lock rods.
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
2. Install the door handle with the bolts.
Tighten:
Tighten the outside door handle bolts to 4.5 N.m (40 lb.in).
3. Install the door seal trim. Refer to Door Seal Trim Installation.