Verona L6-2.5L (2005)
Front Door Limiter: Service and Repair
Door Hold-Open Link Removal and Installation
Door Hold-Open Link Removal
1. Remove the door seal trim. Refer to Door Seal Trim Removal.
2. Remove the bolts on the door and on the body.
3. Remove the door hold-open link.
Door Hold-Open Link Installation
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
1. Install the door hold-open link to the door and the body with the bolts.
Tighten:
Tighten the door hold-open link-to-body bolt to 25 N.m (18 lb.ft).
Tighten the door hold-open link-to-door bolts to 9 N.m (80 lb.in).
2. Install the door seal trim. Refer to Door Seal Trim Installation.
