Verona L6-2.5L (2005)
Rear Door Striker: Service and Repair
Door Lock Striker Removal and Installation
Door Lock Striker Removal
1. Remove the screws and the door lock striker. (Front door shown, rear door similar.)
Door Lock Striker Installation
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
1. Install the screws and the door lock striker.
Tighten:
Tighten the door lock striker screws to 24 N.m (18 lb.ft).
