Verona L6-2.5L (2005)
Sound Proofing / Insulation: Service and Repair
Deadner Repair
1. Remove the related parts.
-
Seats, carpet.
-
Trims, others.
2. Remove of the damaged deadner.
-
Peel off the damaged deadner with a steel spatula, carefully.
3. Clean and dry.
-
Before applying the deadner, thoroughly clean and dry the areas to be applied.
4. Prelocation the new deadner on the panels to be applied.
NOTE: Avoid the parts mounting holes and service holes.
5. Adhesion of deadner.
-
Heat the surface of deadner with a torch of heating gun until it adheres itself.
-
Push and adhere to the panel with a rubber spatula.
NOTE: In order to take full advantage of the deadner, its face must adhere and contact the panels perfectly.
CAUTION: Be careful not to burn the composite parts when beating.
