Verona L6-2.5L (2005)
6. Slowly push and hold the brake pedal.
7. While the brake pedal is pushed down, loosen the brake fitting at the top of the master cylinder to purge the air from the cylinder.
8. Slightly tighten the brake fitting. Then release the brake pedal slowly. Wait 15 seconds before continuing with the next step.
9. Repeat Steps 6-8 until all of the air is removed from the master cylinder bore.
10. Tighten the brake line fitting.
Tighten: Tighten the brake line fitting to 16 Nm (12 ft. lbs.).
11. After the air has been bled at the top connection, bleed the master cylinder at the side connection using the same sequence as with the top
connection.
