Verona L6-2.5L (2005)
Brake Caliper: Service and Repair
Front
Removal and Installation
Caliper Removal
1. Raise and suitably support the vehicle.
2. To retain wheel balance, mark the position of the front wheel relative to the wheel hub. Remove the wheel.
3. Remove the caliper brake hose inlet bolt. Remove the ring seals.
4. To prevent fluid loss or contamination, plug openings at the caliper inlet and the brake hose.
5. Remove the caliper mounting bolts.
6. Remove the caliper.
Caliper Installation
1. Install the caliper
2. Install the caliper mounting bolts.
Tighten: Tighten the caliper mounting bolts to 27 Nm (19 ft. lbs.).
