Verona L6-2.5L (2005)
4. Remove the inner seal from the bore. Avoid scratching the bore.
5. Remove the bleeder valve dust cap and the bleeder valve.
CAUTION: Do not use a hone or any other procedure to remove material from the caliper bore or the piston.
6. Clean all parts in denatured alcohol or brake fluid. Dry the parts with unlubricated compressed air and blow out all passages in the housing and the
bleeder valve.
7. Inspect the piston and caliper for scoring, nicks, or corrosion. Replace any components which show these conditions.
8. Install the bleeder valve and the dust cap.
9. Lubricate a new piston inner seal with brake fluid.