Verona L6-2.5L (2005)
9. Remove the master cylinder assembly.
10. Drain the brake fluid.
Master Cylinder Assembly Installation
1. Install the master cylinder assembly with the mounting nuts.
Tighten: Tighten the master cylinder mounting nuts to 13 Nm (115 inch lbs.).
2. Install the brake lines to the master cylinder body.
Tighten: Tighten the master cylinder brake lines to 16 Nm (12 ft. lbs.).
3. For vehicles with the manual transaxle, install the clutch hose connection to the master cylinder with the clip.
