Verona L6-2.5L (2005)
2. Remove the nuts and bolts securing the parking brake cable to the holding brackets, attached to the under body near the fuel tank.
Tighten: Tighten the parking brake cable bracket securing bolts and nuts to 23 Nm (17 ft. lbs.).
3. Install the parking brake cable rod and the parking brake cable ends to the parking brake cable rod.
4. Install the parking brake adjustment nut to the eye bolt pull rod of the parking brake lever assembly and be sure to check the parking brake
adjustment by referring to the original removal adjustment nut measurement taken in the removal procedure.
5. Install the parking brake/gearshift console hood.