Verona L6-2.5L (2005)
Vacuum Brake Booster: Service and Repair
Power Booster Assembly Removal and Installation
Power Booster Assembly Removal
1. Remove the master cylinder.
2. Remove the clamp on the vacuum hose connection to the booster.
3. Remove the vacuum hose from the booster.
4. Disconnect the brake stoplamp switch.
5. Remove the brake pedal spring.
6. Disconnect the clip and remove the pushrod pin from the pedal bracket assembly.
7. Remove the booster mounting nuts from the studs protruding from the dash panel, and remove the booster.
8. Remove and discard the gasket.
