Verona L6-2.5L (2005)
Tighten the connecting rod cap bolts to 200 Nm (148 ft. lbs.). After finishing the initial tightening, turn the bolts by 45° then another 90°.
10. Install the lower crankshaft bearing.
NOTE: The lower crankshaft bearings have different groove shape and the sizes of the crankshaft bearings are identified by the color marks on
the side of the bearing, which are green (Size-0), yellow (Size-1), and pink (Size-2).
11. Install the bed plate.
12. Seat and install the crankshaft rear oil seal using the crankshaft rear oil seal installer DW110-180-02.
13. Install the cylinder head.
