Verona L6-2.5L (2005)
9. Tighten the front engine mount bracket-to-damper bush bolt.
Tighten the front engine mount bracket-to-damper bush bolt to 70 - 90 Nm (52 - 66 ft. lbs.).
10. Tighten the oil pan flange-to-transaxle bolt.
Tighten the oil pan flange-to-transaxle bolt to 27 - 35 Nm (20 - 26 ft. lbs.).
11. Discard used oil pan drain plug washer and replace it with a new one.
12. Install the oil pan drain plug.
Tighten the oil pan drain plug to 35 - 45 Nm (26 - 33 ft. lbs.).
13. Refill the engine with engine oil.
14. Install the engine under cover.