Verona L6-2.5L (2005)
5. Replace the fuel filter into its mounting clamp.
6. Install the heater/air distributor case assembly screws on either side of the heater core pipes.
Tighten:
Tighten the heater/air distributor case assembly screws to 8 N.m (71 lb.in).
7. Install the two heater hoses.
8. Slide the heater hose clamps into position.
9. Install the vacuum hose.
10. Install the instrument panel carrier assembly. Refer to Instrument Panel Installation.
11. Fill the cooling system. Refer to Draining and Refilling the Cooling System.
12. Connect the negative battery cable.
13. Operate the controls to verify that the heating and ventilation systems function properly.
