Verona L6-2.5L (2005)
2. Position the hose into the vehicle, and install the nut at the condenser connecting block.
Tighten:
Tighten the discharge hose connecting block-to-condenser retaining nut to 16 N.m (12 lb.ft).
3. Mate the hose connecting the connecting block to the compressor, and install the retaining nut.
Tighten:
Tighten the discharge hose connecting block-to-compressor retaining nut to 38 N.m (28 lb.ft).
4. Evacuate and recharge the A/C system. Refer to Discharging, Adding Oil, Evacuating, and Charging Procedures for A/C System.
5. Connect the negative battery cable.