Verona L6-2.5L (2005)
6. Remove the high-pressure pipe-to-receiver-dryer connecting block retaining nut.
7. Remove the surge tank. Refer to Surge Tank Removal.
8. Remove the high-pressure pipe-to-evaporator flange connecting block retaining nut.
9. Remove the bolt and the nut which secure the clamps that hold the high pressure pipe to the vehicle.
10. Remove the high-pressure pipe from the vehicle.
11. Cap the opening at the receiver-dryer to prevent contamination.
A/C High-Pressure Pipe Line Installation
1. Position the high-pressure pipe into the vehicle.
2. Install a new O-ring on the pipe at the receiver dryer.