Verona L6-2.5L (2005)
Fog/Driving Lamp: Service and Repair
Fog Lamps Removal and Installation
Fog Lamps Removal
1. Disconnect the negative battery cable.
2. Remove the screws that secure the fog lamp assembly.
3. Remove the fog lamp assembly.
4. Disconnect the fog lamp assembly electrical connector.
5. Remove the screws and fog lamp access cover.
6. Remove the retaining wire.
7. Remove the bulb from the fog lamp assembly.
8. Disconnect the bulb electrical connector.
Fog Lamps Installation
1. Connect the bulb electrical connector.
2. Install the bulb from the fog lamp assembly.
3. Install the retaining wire.