Verona L6-2.5L (2005)
Fluid - A/T: Service and Repair
Changing the Fluid
Changing the Fluid
Tools Required:
DW260-070 Plug Remover/Installer
1. Raise and suitably support the vehicle.
2. Place a fluid container below the fluid drain plug.
3. Remove the transaxle fluid drain plug using the plug remover/installer DW260-070.
Tighten: Tighten the Plug to 45 Nm (33 ft. lbs.).
4. Adding transaxle fluid.
5. Connect the negative battery cable.