Location of Knock Sensor on 2005 Verona L6-25L | Page 1575
Knock Sensor: Service and Repair
Knock Sensor Removal And Installation
Knock Sensor Removal
1. Disconnect the negative battery cable.
2. Remove the VIS vacuum tank. Refer to "VIS Vacuum Tank". See: Fuel Delivery and Air Induction/Variable Induction System/Vacuum
Reservoir/Service and Repair
3. Remove the wiring harness from the wiring support bracket.
4. Disconnect the knock sensor wiring harness connector.
5. Remove the knock sensor.
Knock Sensor Installation
1. Installation should follow the removal procedure in the reverse order.
