Verona L6-2.5L (2005)
1. Installation should follow the removal procedure in the reverse order.
2. Install the intake manifold.
Tighten the seven (7) intake manifold retaining bolts to 10 - 14 Nm (89 - 124 inch lbs.).
Tighten the four (4) intake manifold retaining nuts to 10 - 14 Nm (89 - 124 inch lbs.).
Tighten the two (2) bolts on the intake manifold support bracket to 10 - 14 Nm (89 - 124 inch lbs.).
NOTE: Install the intake manifold after installing the fuel rail.
CAUTION: Genuine intake manifold retaining bolts within the specifications should be used to prevent damaged intake manifold from impairing
the airflow to the cylinder.
