Verona L6-2.5L (2005)
5. Remove the CKP sensor.
Crankshaft Position (CKP) Sensor Installation
1. Installation should follow the removal procedure in the reverse order.
2. Install the crankshaft position (CKP) sensor.
Tighten:
Tighten the CKP sensor retaining bolt to 5 ~ 8 N.m (44 ~ 71 lb.in).
3. Install the CKP sensor heat shield housing.
Tighten:
Tighten the CKP sensor heat shield housing bolt to 7 ~ 9 N.m (62 ~ 80 lb.in).