Verona L6-2.5L (2005)
3.
Remove the plastic adjuster covers and the four bolts securing the seat to the floor.
4.
Move the seat back all the way forward and lift the front side of the seat up to view the underside of the seat.
5.
Disconnect the connector and then reconnect the connector.
6.
Lower the seat down. Use the scan tool and clear the DTCs from memory.
7.
Wait 30 seconds and check DTCs again. If DTCs return, this TSB will not repair the DTCs. Further diagnosis is required. If no DTCs return
continue to step 8.