Verona L6-2.5L (2005)
5. Install the control arm ball joint bolt.
Tighten: Tighten the control arm ball joint bolt to 110 Nm (81 ft. lbs.).
6. Install the outer tie rod bolt.
Tighten: Tighten the outer tie rod bolt to 50 Nm (37 ft. lbs.).
7. Install the washer and the caulking nut onto the axle shaft.
Tighten: Tighten the caulking nut onto the axle shaft to 320 Nm (236 ft. lbs.).
8. Bleed the air out of the brake system.
