Verona L6-2.5L (2005)
7. Connect the power steering gear fluid inlet pipe.
Tighten: Tighten the steering gear inlet pipe fitting to 28 Nm (21 ft. lbs.).
8. Connect the hose to the power steering gear fluid outlet pipe.
9. Install the wheels.
10. Lower the vehicle.
11. Do a straight-ahead check.
12. Refill the power steering system and check for leaks. If leaks are found, correct the cause of the leak and bleed the system.
CAUTION: When adding fluid or making a complete fluid change, always use power steering fluid DEXRON-II or III or equivalent. Failure to
use the proper fluid will cause hose and seal damage and fluid leaks.
13. Connect the negative battery cable.
