Verona L6-2.5L (2005)
Tie Rod: Service and Repair
Outer Tie Rod Removal and Installation
Outer Tie Rod
Removal
Tools Required:
KM-507-B Ball Joint Remover
1. Remove the wheel.
2. Mark the threads on the inner tie rod to aid in repositioning the adjusting nut.
3. Remove the outer tie rod nut and disconnect the outer tie rod from the steering knuckle using the ball joint remover KM-507-13.
4. Loosen the outer tie rod adjusting nut and remove the outer tie rod by twisting it off the inner tie rod.
Installation
1. Reposition the adjusting nut to the marks on the inner tie rod.
2. Install the outer tie rod by twisting it onto the inner tie rod.
