Verona L6-2.5L (2005)
Front Cross-Member: Removal and Replacement
Center Member
Removal
1. Remove the engine under covers.
2. Remove the bolts and reposition the power steering return line.
3. Remove the forward engine mount through-bolt.
4. Remove the rear engine mount through-bolt.
5. Remove the bolts and the center member (center member-to-crossmember bolt shown).
Installation
1. Install the center member with the bolts (center member-to-radiator bolt shown).
Tighten:
-
Tighten the center member-to-crossmember bolt to 90 N.m (66 lb-ft).
-
Tighten the center member-to-radiator bolt to 90 N.m (66 lb-ft).