Verona L6-2.5L (2005)
Lateral Stabilizer Rod: Service and Repair
Front
Front Parallel Link
Removal
1. Raise and suitable support the vehicle.
2. Remove the rear wheels.
3. Remove the rear parallel link bolt-to-knuckle and the bolt-to-rear crossmember.
4. Remove the rear parallel link.
Installation
1. Install the front parallel link bolt-to-knuckle and the cam bolt-to-rear crossmember.
Tighten: Tighten the front parallel link bolt-to-knuckle to 110 Nm (81 ft. lbs.)
2. Adjust the rear toe, if needed.
3. Tighten the front parallel link bolt.
Tighten: Tighten the cam bolt to 80 Nm (59 ft. lbs.).