Verona L6-2.5L (2005)
Lateral Stabilizer Rod: Service and Repair
Rear
Rear Parallel Link
Removal
1. Raise and suitably support the vehicle.
2. Remove the rear wheels.
3. Remove the rear parallel link.
4. Remove the stabilizer shaft-to-stabilizer link nut.
Installation
1. Install the rear parallel link with bolt-to-knuckle and the bolt-to-rear crossmember.
Tighten: Tighten the rear parallel link bolt-to-knuckle and the bolt-to-crossmember to 110 Nm (81 ft. lbs.).