Verona L6-2.5L (2005)
Trailing Arm: Service and Repair
Trailing Link
Removal
1. Raise and suitably support the vehicle.
2. Remove the rear wheels.
3. Remove the trailing link bolt-to-knuckle and the trailing link bracket bolts.
4. Remove the trailing link.
Installation
1. Install the trailing link with bolt-to-knuckle and the bolts-to-trailing link bracket.
Tighten: Tighten the trailing link bolt-to-knuckle to 120 Nm (89 ft. lbs.) and the trailing link bracket bolts 90 Nm (66 ft. lbs.).
