Verona L6-2.5L (2005)
Control Module: Customer Interest
A/T - Won't Shift Correctly After Replacement
VERONA
Section Title: Transmission
TSB No. TS 03 01238
Division: Automotive
Category: Technical
SUBJECT:
AUTOMATIC TRANSMISSION CONTROL MODULE INITIALIZATION PROCEDURE
MODEL(S):
VERONA (RP625)
YEAR:
2004~2006
CONDITION:
Automatic transmission will not shift properly after Transmission Control Module (TCM) or assembly replacement.
CAUSE:
Tech 2 "AT learned initialize" procedure was not performed after A/T assembly replacement or TCM replacement. The transmission module
automatically compensates or "learns" and maps transmission wear condition and engine torque output, to provide the best possible shift under any
condition. If not reset, the module will shift with the previous shift mapping that may not work properly with the new component.
CORRECTION: