Verona L6-2.5L (2005)
Use the Tech 2 to perform the "AT learned initialize" procedure after transmission component replacement, including the transmission assembly and/or
the transmission control module replacement, or reprogramming. It is recommended to test drive the vehicle after initialization sufficiently to get the
transmission to shift up through 4th lock-up. Decelerate gradually to a full stop at least one time. The AT learned initialize procedure is found in the
Tech 2; follow this path to access the AT learned initialize function: SUZUKI -> North America -> (L)VERONA -> Power Train -> Transmission ->
Misc. Test -> AT learned initialize. See above.
WARRANTY CLAIM INFORMATION
Disclaimer