Verona L6-2.5L (2005)
Shift Cable: Adjustments
Shift Control Cable Adjustment
It is very important to match the shift control lever correctly with the selector lever connection. Place the shift control lever in the P position and check
the selector lever connection to see if it is all the way forward. If it is not, proceed with the following adjustment.
1. Remove the battery.
2. Remove the air filter housing.
3. Remove the floor console.
4. Place the shift control lever in the P position.
5. Loosen the pinch bolt nut on the shift control lever.
6. Place the selector lever connection all the way forward on the transaxle case.
7. Insert the shift control cable into the shift control lever tightly.
8. Secure the shift control cable with the shift control cable adjuster pinch bolt and nut.
Tighten: Tighten the nut to 8 Nm (71 inch lbs.).
9. Install the floor console.
10. Install the air filter housing.
11. Install the battery.