Verona L6-2.5L (2005)
2. Install the shift control cable onto the transaxle mount.
3. Install the shift control cable onto the shift control assembly.
4. Tighten the nut on the cable bracket.
5. Install the shift control cable adjuster pinch nut.
Tighten: Tighten the nut to 8 Nm (71 inch lbs.).
6. Install the clip to the shift control cable at the transaxle mount connection.
7. Install the clip to the select lever connection on the transaxle case.
8. Adjust the shift control cable.
9. Install the air filter housing assembly and bolts.
Tighten: Tighten the bolts to 10 Nm (89 inch lbs.).
10. Connect the negative battery cable.
