Verona L6-2.5L (2005)
14. Re-align, attach and tighten down the shift gate. Tighten the bolt 1/16th of a turn from seated.
15. Reposition the shift lock solenoid wires removed from step 11.
16. Position the center console facia over the shift lever and tuck the wire harnesses into the console away from any movable area of the shifter.
17. Re-attach the facia to the console starting at the front. The front section of the facia will have to be carefully positioned between the radio facia and
the manual shift lock release.
18. Snap the console facia back into place and tighten down with three previously removed screws.
19. Re-insert the console box.
