Verona L6-2.5L (2005)
9. Remove the oil cooler inlet pipe assembly.
Oil Cooler Pipes / Hoses Installation
1. Install the oil cooler inlet pipe assembly and the bolts.
Tighten: Tighten the oil cooler inlet pipe bolts to 35 Nm (26 ft. lbs.).
2. Install the oil cooler outlet pipe assembly and the bolts.
Tighten: Tighten the oil cooler outlet pipe bolts to 35 Nm (26 ft. lbs.).
3. Refill the transaxle fluid.
4. Connect the negative battery cable.