Verona L6-2.5L (2005)
3. Fill the joint seal with 200 to 220 g (7.1 to 7.8 ounces) of the recommended grease. Repack the joint with 200 to 220 g (7.1 to 7.8 ounces) of the
recommended grease.
4. Install a new large seal retaining clamp and a new small seal retaining clamp.
5. Crimp the new small seal retaining clamp and the new large seal retaining clamp using the seal clamp pliers J-35566.
6. Install the drive axle shaft to the vehicle.
