Vitara 2WD V6-2.5L (2004)
7. Remove timing chain tensioner adjuster No.3 (1).
To remove it, slacken LH bank 2nd timing chain by turning intake camshaft (2) counterclockwise a little while pushing back pad.
8. Remove LH bank intake and exhaust camshaft sprocket bolts.
To remove it, fit a spanner to hexagonal part (3) at the center of camshaft to hold it stationary.
9. Remove LH bank exhaust camshaft sprocket (1).
CAUTION: Removing sprocket (1) from camshaft (2) may cause cam to turn, resulting in damage to valve and piston. To prevent this, when
removing sprocket, hold camshaft stationary by using a spanner at its hexagonal part.
10. Remove LH bank intake camshaft sprocket.
11. Remove LH bank 2nd timing chain.
Inspection
Timing Chain Guide No.4 and No.5
