Vitara 2WD V6-2.5L (2004)
Reverse removal sequence to install desiccant, according to instruction manual with supply parts.
NOTE:
-
When replacing desiccant, add 40 cc of refrigerating oil the same as compressor oil.
-
Do not remove desiccant from the plastic bag until just before inserting it into the receiver / dryer.
-
Install the desiccant (1) with its double-layer portion facing the bottom of receiver / dryer.
-
If desiccant cap installing is bolt type, tighten specified torque for its bolt.
Tightening torque:
Cap 12.5 N.m (1.25 kg.m, 9 ± 1.8 lb.ft)