Vitara 2WD V6-2.5L (2004)
Power Steering Pump: Testing and Inspection
Power Steering Pump Inspection
Inspection
Pump Body, Cover, Side Plate and Shaft
Check sliding surfaces of each part for wear and damage. If any defect is found replace pump assembly.
Cam Ring
Check vane sliding surface of cam ring for wear and damage. If any defect is found, replace pump assembly.
Rotor and Vane
^
Check sliding surfaces of rotor and vane for wear and damage.
^
Check clearance between rotor and vane. Replace pump assembly if any defect is found.
Clearance between rotor and vane
Standard: 0.015 mm (0.0006 inch)
Limit: 0.027 mm (0.0011 inch)
