Vitara 2WD V6-2.5L (2004)
Suspension Spring ( Coil / Leaf ): Service and Repair
Front
Removal
1. Hoist vehicle, allowing front suspension to hang free.
2. Remove wheels.
3. Remove axle shaft drive flange (1) (for 4WD vehicle).
4. Remove front drive shaft circlip (1) and front spindle thrust washer (2) (for 4WD vehicle).
5. Remove caliper bolts and suspend caliper with a wire hook (1).
CAUTION: Hang removed caliper with a wire hook so as to prevent brake hose from bending and twisting excessively or being pulled. Don't
operate brake pedal with pads removed.
6. If equipped with ABS, remove harness clamp bolt (2) and remove front wheel speed sensor (1) from knuckle.