Vitara 4WD L4-2.0L (2003)
Liftgate Window Glass: Removal and Replacement
Back Door Glass Removal And Installation
Refer to Windshield Removal and Installation procedures and cautions are basically the same. However, note the following.
^
Before applying primer to glass edge, install molding according to installing position shown in the figure.
^
Observe the following precautions when applying adhesive along glass edge.
-
Adhesive should be applied evenly especially in height.
-
Be careful not to damage primer.
-
Press glass against body quickly after adhesive is applied.
Area applied primer (back door glass)
Width "d": 16 mm (0.63 in.)
Adhesive amount specification (back door glass)
Height "b": 15 mm (0.59 in.)
Width "c": 8 mm (0.31 in.)
Clearance "e": 1 mm (0.04 in.)
