Vitara 4WD L4-2.0L (2003)
Sunroof / Moonroof Motor: Removal and Replacement
Sliding Roof Motor Removal And Installation
Removal
1. Remove head lining.
2. Disconnect coupler (3) and remove sliding roof motor assembly (1) by removing 3 screws (2).
CAUTION: After removing sliding motor assembly, do not move guide and link.
Installation
1. Connect coupler and push the "CLOSE" side of the side switch.
2. Match marks (holes (2)) for completely closed position of sliding roof motor assembly (1).
3. Install sliding roof motor assembly (1).
4. Install head lining.