Vitara 4WD L4-2.0L (2003)
Lateral Accelerometer: Service and Repair
Type 1
Removal
1. Turn ignition switch to "OFF" position and disconnect battery negative cable.
2. Remove rear center console box.
3. Remove parking brake lever bolts (rear side) (3) and G sensor (2) with bracket from floor.
NOTE: Loosen only bolt (front side) (4).
4. Remove sensor (2)with bracket from floor.
5. Disconnect connector from sensor (2).
CAUTION:
-
Do not separate sensor (2) and bracket (5). It will lead to erroneous assembly.
-
Sensor must not be dropped or shocked. It will affect its original performance.
Installation
1. Connect connector to sensor securely.
2. Install sensor with bracket and parking lever assembly (2) onto floor so that arrow mark directs vehicle forward (1).
Tightening torque
Parking lever assembly mounting bolt (a): 23 Nm (2.3 kgf-m, 17.0 ft. lbs.)
3. Install rear console box.