Vitara 4WD L4-2.0L (2003)
4. Remove caliper (2).
Installation
1. Install caliper to caliper carrier.
2. Torque caliper pin bolts (1) to specifications.
NOTE: Make sure that boots are fit into groove securely.
Tightening torque
Caliper pin bolt (for H25 engine model) (a): 50 Nm (5.0 kgf-m, 36.5 ft. lbs.)
Caliper pin bolt (for H25 engine model) (b): 85 Nm (8.5 kgf-m, 61.5 ft. lbs.)
Caliper pin bolt (for G16/J20 engine models) (c): 27 Nm (2.7 kgf-m, 20.0 ft. lbs.)
3. Install brake flexible hose as shown and torque hose mounting bolt (1) to specification.
Tightening torque
Flexible hose bolt (a): 23 Nm (2.3 kgf-m, 17.0 ft. lbs.)