Vitara 4WD L4-2.0L (2003)
Fan Clutch: Service and Repair
Removal
1. Disconnect negative cable at battery.
2. Drain coolant system by loosening drain plug (1) of radiator.
3. Disconnect radiator inlet hose from radiator.
4. Loosen cooling fan / clutch nuts.
5. Remove P/S oil tank stay bolts (1) from radiator stay (G16 / H25 engines only).
6. Remove radiator shroud securing clips.
7. Then remove cooling fan / clutch and radiator shroud.
Installation
Install removed parts in reverse order of removal procedure.
After installation, adjust belt tension for specification.
NOTE:
^
Refill cooling system with proper coolant.
^
After installation, check each joint for leakage.
Inspection