Vitara 4WD L4-2.0L (2003)
Brake Light Switch: Adjustments
Brake Light Switch Adjustment
Adjustment should be made as follows when installing switch. Pull up brake pedal toward you and while holding it there, adjust switch position so that
clearance between end of thread and brake pedal return cushion (shown as "b" in figure). Then tighten lock nut to specified torque.
Clearance "b" between end of thread and brake pedal return cushion "b": 1.5 - 2.0 mm (0.06 - 0.08 inch)
Tightening torque
Brake light switch lock nut (b): 7.5 Nm (0.75 kgf-m, 5.5 ft. lbs.)